How to Make a Wine Bottle Hummingbird Feeder

This time of year you can typically find my Etsy shop shelves stocked with a variety of upcycled bird feeders.  And this year I've added a line of Booze Bottle Bird Feeders made from bottles that a local restaurant would have otherwise thrown in the trash.  Recycling isn't as widely accepted where I live as it is in major cities across the country.  Here, waste management services typically charge restaurants (and even some residents) an additional fee for recycling so it's more cost effective just to toss everything in the garbage.  I know, sad, but true.

I thought I'd show you how to make one of my simpler bird feeder styles.  It's a hummingbird feeder made from a wine bottle and I've put together a video tutorial for it.

I go over the tools you'll need to make this bird feeder in the video, but the one thing that you'll likely have a hard time finding are the stoppers with the built in tube feeder.  I can't tell you how many people ask me if I sell just the stoppers when I'm out at Farmer's Markets and other festivals.  So, here are the one's I use:



I hope you'll enjoy making these and share the project with your bird loving friends!

Linking up to Catch As Catch Can on My Repurposed Life

How To Make a Butterfly Feeder from Thrifted Stuff

My Mother's Day Patio Makeover included lots of fun little feeders for birds and butterflies.  Mom loves Hummingbirds so, of course, I added one of my wine bottle hummingbird feeders to the mix:

And tucked away in the same photo is a small butterfly feeder made from a thrifted salad plate and a glass sundae dish.

If you'd like a closer look at the butterfly feeder or want to know how to make one of your own, you can check out this YouTube video or even jump back to a post I wrote last year on how to make a bird bath.  It's the same concept.  And so is this bird seed feeder.  I simply glued a large ceramic candle holder to a fancy flower pot and viola! we have ourselves a colorful bird (and squirrel) seed feeder.

It really doesn't take much to add some color to your gardens, not to mention functional art.  So head out to the thrift store and then pick up some silicone...and get busy.  Make some for your mom and then make some for you.  Everyone needs a beautiful song in the garden, don't they?

My "Simple" Bird Feeder

I thought this would be a very simple project but boy, oh boy was I wrong.  Thankfully, I can share my screwups so you can avoid them when you upcycle your very own bird feeder.  Here's my finished product:

I actually found two of those wavy plates at Goodwill and the mug at a yard sale. They were the perfect match for this project!  So here's what you'll need:

1.  Mug and a saucer
2.  Length of PVC
3.  PVC cutter
4.  Silicone adhesive
5.  PVC coupling with a threaded end
6.  PVC plug

First, you'll want to take care of the gluing. Use the silicone to glue the plate and the mug together.  Then the PVC plug - well, this needs some backstory!  I desperately wanted to put this project together without drilling holes in the bird feeder so I headed to the plumbing section of my local hardware store.  I searched high and low for a  cap that I could put on top of the PVC pole with a flat surface for gluing to the bottom of the plate.  Unfortunately, every cap in the plumbing isle had a curved surface, not ideal for attaching to the plate.  So I grab a plug that would screw into a coupling.  It sort of has a flat surface but there is a giant crevice in the plug.

After several failed attempts at attaching the plug to the plate, this is what I figured I needed to do. Screw the plug into the coupling then fill the crevice in the plug about a third or the way with silicone.  Let it dry overnight, then repeat one to two more times until you have a nice flat surface.

Then you can simply apply glue to the plug and attach it to the plate.  Let dry overnight.  Right about now, you might be wondering why we would need to fill the plug.  I just couldn't get a good grip on the dish when I applied it to the rim of the plug alone.  And I tried to fill the plug up all at once and it just wouldn't dry.  But this crazy method seems to be working.  If you can find something with a truly flat surface you can avoid all this nonsense but I didn't have a ton of luck.

Hi, Chico!

While everything is drying, cut your PVC to length and stick it into the ground.  Then you'll just need to drop the finished feeder on top of the pole once it's dried.

This method also makes for easy cleaning.  You can just pull it off the pole and bring the feeder portion to the sink.

If you figure out a better solution for the plug, please do post it below!  Enjoy!

My Snapple Bird Feeder

Have you seen those bird feeders using glass bottles in a wooden frame attached to the house?  I've seen a couple but I really wanted a hanging version, so I made this bird feeder:

 

I think it needs a bit of design work but the concept is ready to share, you might to grab a cup of coffee, this is a long one.  Here's what you'll need to make your very own upcycled bird feeder:

1. A glass bottle with lid, you'll want a bottle with a larger opening so the seed will fit through.
2. The bottom of a 2 liter soda bottle
3. Craft wire
4. Galvanized Steel Wire
5. Drill, maybe.  If you can start the hole in the lid with a nail and hammer you can use a good pair of scissors to widen the hole
6.  Scissors...oh yeah, you'll need a blow dryer too.

The first thing you'll want to do is set up the cup portion of the feeder.  Cut around the bottom of the soda bottle to give you the shape of the flower.  Be careful not to cut too low between the "petals" or you'll end up with a leaky cup.

To help the birds latch on you'll need to make a sort of ledge on the petals.  Nothing fancy, just flip your bottle bottom over so the petal tips are on the table and use your blow dryer heat the edges.  As you do, apply a little pressure to guide the shape. This will help the edges bend over instead of just giving you a way appearance.    This doesn't take very long so be sure to keep an eye on it.


Now we need to attach this to the lid, so drill a hole in the lid and use a pair of scissors to widen the hole.  It needs to be pretty wide to fit the seed through (I had to widen the hole in the picture) but not so wide that steel loop falls out.

Now grab a length of galvanized steel wire, 12-15" long should do it.   Take one end and form a loop that is just slightly smaller than the caps diameter.  Then make a 90 degree angle in the wire at a spot that will allow the wire to pass through the center of the hole in the lid.

You'll repeat a similar process to attach the feeding bowl.  First poke a hole in the center of the soda bottle bottom and insert the steel wire. Form a loop that will support the bowl.  Make any adjustments that you need to make so that the bowl lies flat on the galvanized wire.  When determining how long to make the piece of wire between the lid and the bowl, keep in mind that the lid should be inside the bowl to control the flow of seed.

The assembled bowl piece should look like this.  When you attach it to the bottle you may need to wiggle it...just a little bit (name that tune) to adjust that wire out of the way of the bottle's rim.   Okay, last part.  You'll need a cage from which to hang your bottle.

I've used four different colors of fine craft wire - five feet of each color.  Holding all four pieces together, bend them in half and begin twisting them. You'll only need to twist enough to go around the neck of the bottle.  And, leave a small loop at the place that you bent the wires.   Pull the wires through the loop and bend them back on themselves.  


Here's were the fun begins, separate the wires so that you have four bundles of two (I separated mine by color). Now think chicken wire. Wrap two bundles around the bottle and twist them together a few times.  Bring those same bundles back in the same direction from which they came and twist them each to one of the remaining bundles.  Continue in this fashion until you get to the bottom of the bottle. (This might require some video!)

Now gather up all of your pieces, twist them together and form a closed loop for hanging. 

Fill 'er up, screw on the lid/bowl assembly and hang it in the garden.